Changing labels on floor plans

This section explains how to change a room label on the iGUIDE Portal, 
here. If a room label requires a change or modification in any way then follow these steps:

  1. Log in to the Portal

  1. Go to My iGUIDEs and find the iGUIDE that needs to be edited and click Edit.

  1. Scroll down to Preview.

  1. Click on the pencil icon that is beside the label which needs to be updated, modified, or changed. See figure 1.

Figure 1: Selecting a label to edit

  1. You will see a pop up on top of the 3D Tour area, here you can change the label text in the provided pop up and click the blue Ok button, (make sure to use all capital letters for consistency) You may also enable/disable measurements for each room here. See Figure 2.

Figure 2: Editing a label

  1. You can also change the floor labels from this page, simply select the pencil icon next to the floor name to modify. See Figure 3.

    Figure 3: Selecting a Floor label

  2. You may also modify the properties of the floor here, such as the Perimeter Wall Thickness, or mark a floor as Below Grade. See Figure 4.

Figure 4: Modifying floor properties

  1. Once the label has been changed click the Save button at the bottom of the page. See Figure 5.

Figure 5: Saving your work

Adding a Custom Label to your floor plan

This section will guide you through adding a custom label to an iGUIDE Floorplan. 

  1. Click on the Actions button, below the address on the iGUIDE preview under the "Edit Default View" page. See Figure 6.
  2. Click on "Add New Label"
  3. Move the label to the desired location by clicking on the Arrow Cross, and dragging.
  4. Click on the Pencil Icon to change the label name + preferred font size. Refer to Figure 7

Figure 6: Adding a Label

Figure 7: New Label Config